Products

• Quad-Core CPU, 717 MHz “Turbo Engine”
• 802.11ac 2×2 Wave 2 MU-MIMO
• Beamforming Optimizes Antenna Signal, Reception & Reliability for Clients
• (2) Detachable 5 dBi SMA Antennas
• High 23 dBm Transmit Power Extends Wi-Fi Outdoors
• IP55-Rated Weatherproof & Dustproof Housing

Technical Specifications

Standards : IEEE802.11a/n/ac on 5 GHz

Processor :

• Qualcomm® 717 MHz Quad-Core CPU
• 4x ARM Cortex A7

Antenna :

• High-Gain Omni-Directional 5 dBi Antenna
• Compatible with EnGenius SA5219 Sector Antennas

Physical Interface :

• 2 x 10/100/1000 Base-TX, RJ-45 Gigabit Ethernet Ports
• 1 x Reset Button
• Link Aggregation Achieves 2 Gbps Throughput

LED Indicators :

• Power
• LAN1
• LAN2
• WLAN
• Signal

Power Source :

• Power-over-Ethernet: 24V Proprietary PoE
• Active Ethernet (PoE)

Maximum Power Consumption : 7.5W

Surge Protection :

• Line to Line: 1 KV
• Line to Ground: 2 KV

ESD Protection :

• Contact: 4KV
• Air: 8 KV

Wireless & Radio Specifications

Operating Frequency : 5 GHz

Operation Modes :

• Access Point Mode (AP mode)
• Client Bridge Mode (CB Mode)
• WDS: WDS AP, WDS Bridge, WDS Station

Frequency Radio :

• 5 GHz: 5150 MHz ~ 5250 MHz
• 5250 MHz ~ 5350 MHz
• 5470 MHz ~ 5725 MHz
• 5725 MHz ~ 5850 MHz Support radios and channels will be varied on the configured regulatory domain

Transmit Power : Up to 15 dBm on 5 GHz

Radio Chains/Spatial Stream : 2 x 2:2

SU-MIMO : 5GHz – Two (2) Spatial Stream SU-MIMO up to 867 Mbps to individual 2×2 VHT40 client devices

MU-MIMO : 5GHz – Two (2) Spatial Stream Multi User (MU) MIMO for up to 867Mbps to two (2) MU-MIMO capable wireless devices simultaneously

Supported Data Rates (Mbps) :

• 5 GHz: Max 867
• 802.11a: 6, 9, 12, 18, 24, 36, 48, 54
• 802.11n: 6.5 to 300 Mbps (MCS0 to MCS15)
• 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)

Supported Radio Technologies :

• 802.11a/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
• 802.11n/ac: 2×2 MIMO With 2 Streams

Channelization :

• 802.11ac Supports Very High Throughput (VHT)—VHT 20/40/80 MHz
• 802.11n Supports High Throughput (HT)—HT 20/40 MHz
• 802.11n/ac Packet Aggregation: AMPDU, ASPDU

Supported Modulation :

• 802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM
• 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Management Features

Multiple BSSID : Supports 8 SSIDs

VLAN Tagging :

• Supports 802.1q SSID-to-VLAN Tagging
• VLAN Pass-Through
• Management VLAN

Spanning Tree : Supports 802.1d Spanning Tree Protocol

QoS (Quality of Service) : Complaint With IEEE 802.11e Standard WMM

Deployment Options :

• Stand-Alone (Individually Managed)
• Managed Mode (w/ezMaster/Neutron Series Switch)

Stand-Alone Management Features :

• Auto Channel Selection
• Auto Transmit Power
• Wireless STA (Client) Connected List
• Guest Network
• Fast Roaming (802.11k & 802.11r)
• Pre-Authentication (802.11i, 802.11x)
• PMK Caching (802.11i)
• RSSI Threshold
• Traffic Shaping
• VLANs for Access Point – Multiple SSIDs
• Backup/Restore Settings
• Auto Reboot
• E-Mail Alert
• Site Survey
• Save Configuration as Users Default

Control Features :

• Managed Mode (w/ezMaster/Neutron Switch)
• Distance Control (ACK Timeout)
• Multicast Supported
• Wi-Fi Scheduler
• Client Traffic Status
• RADIUS Accounting
• Power Save Mode (U-APSD Support)
• CLI Support
• HTTPS

Wireless Security :

• WEP Encryption 64/128/152 bit
• WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
• Hide SSID in Beacons
• Wireless STA (Client) Connected List
• Client Isolation

Dimensions & Weight

ENS500EXT-AC Device :

• Weight: 0.65 lbs. (0.29 kg)
• Width: 3.93” (100 mm)
• Length: 7.20” (185 mm)
• Height” 1.08” (27 mm)

Package Contents :

• 1 – ENS500EXT-AC Outdoor Access Point
• 1 – PoE Adapter (EPA2406GP)
• 2 – Pole-Mounting Brackets
• 1 – Wall-Mount Screw Set
• 2 – 5 GHz 5 dBi SMA Antennas
• 1 – Power Cord
• 1 – Quick Installation Guide